To begin, I’ll explain the steps on how to remove an iron on patch. Iron-on patches are a popular way to customize clothing and add a touch of personal style. However, there may come a time when you want to remove the patch, whether it’s because you no longer like the design or you want to repurpose the garment.
In this blog post, I’ll list 6 simple methods on how to remove an iron on patch. Don’t waste time. Let’s dive in!
Gather the Necessary Tools and Supplies
Removing an iron on patch can be a challenging task. But with the right tools, it can be done efficiently and effectively. Now, let’s talk about the necessary tools and supplies you’ll need to remove an iron on patch.
- Iron: Using heat from an iron can help loosen the adhesive of the patch.
- Adhesive remover: There are various adhesive removers available on the market. They are specifically designed for removing iron-on patches. They help dissolve the adhesive, making it easier to remove the patch.
- Hair Dryer: Similarly, use heat to loosen the adhesive of the patch.
- White vinegar: White vinegar is great for loosening glue.
- Tweezers: A pair of tweezers will come in handy for gently lifting and peeling off the patch from the fabric. Make sure to use tweezers with a pointed tip for better precision.
With these tools in hand, you can confidently tackle the task of removing an iron-on patch, ensuring a clean and patch-free fabric surface.
6 Methods on How to Remove an Iron on Patch
Now let’s talk about 6 different methods you can use to remove iron-on patches, whether it’s an embroidered patch or not.
Method 1: Use an Iron
![how to remove an iron on patch is using an adhesive remover](https://b3479809.smushcdn.com/3479809/wp-content/uploads/2023/11/an-iron-3.jpg?lossy=2&strip=1&webp=1)
I’ll start by explaining how to remove an iron on patch with an iron. But pay attention to the fact that different fabrics require different heat settings on the iron. By checking the care label or doing a quick internet search, you can ensure that you’re using the appropriate heat level to avoid damaging the fabric.
- First, heat up the iron to the appropriate temperature for the fabric of the garment.
- Then, place a clean cloth over the iron on patch to protect it from direct heat.
- Next, press the iron onto the cloth, applying firm pressure and moving it in circular motions for about 15–20 seconds. This helps to loosen the adhesive of the patch.
- After that, carefully peel off the patch while it’s still warm.
- If there is any residue left, use a dryer sheet to rub it gently until it comes off.
Using an iron is a quick and effective way to remove iron on patches without causing any damage to the garment.
Method 2: Use an Adhesive Remover
![how to remove an iron on patch is using an adhesive remover](https://b3479809.smushcdn.com/3479809/wp-content/uploads/2023/11/liyuan0719_Adhesive_Remover._b57d81da-8210-4260-a3f0-206a6ab12d69-3.jpg?lossy=2&strip=1&webp=1)
The second method on how to remove an iron on patch is using an adhesive remover. This method is ideal for those who want a quick and efficient way to remove patches without damaging the fabric. The adhesive remover works by dissolving the glue that holds the patch in place, making it easier to remove.
- Start by applying the remover directly to the patch.
- Once the remover is applied, gently lift the edges of the patch using a tweezer and slowly peel it off. It’s important to be careful not to pull too hard, as this could cause the fabric to tear.
- After removing the patch, wash the garment to remove any residue left behind.
This method is perfect for those who want to remove iron on patches and restore the fabric to its original state effortlessly.
Method 3: Freezing
![To remove an iron-on patch using the freezing method](https://b3479809.smushcdn.com/3479809/wp-content/uploads/2023/11/pexels-photo-8289912-1.jpg?lossy=2&strip=1&webp=1)
To remove an iron-on patch using the freezing method, you can follow these steps:
- Start by turning your garment inside out. This will expose the backside of the patch.
- Place the garment in a plastic bag or wrap it with plastic wrap. This will protect it from moisture during the process.
- Put the garment with the patch into the freezer. Make sure it is flat and not folded or crumpled.
- Leave the garment in the freezer for a few hours or overnight.
- After the recommended time, take the garment out of the freezer and peel off the patch.
- If the patch doesn’t come off easily, you can put it back in the freezer for a little longer and try again.
This method may not work for all types of patches or fabrics. If you’re concerned about damaging your garment, it’s always best to consult a professional or follow the manufacturer’s instructions.
Method 4: Use a Hair Dryer
![To remove an iron-on patch using a Hair Dryer](https://b3479809.smushcdn.com/3479809/wp-content/uploads/2023/11/pexels-photo-973406-1.jpg?lossy=2&strip=1&webp=1)
Similar to the ironing method, using a hair dryer also uses heat to loosen the glue.
- Set your hair dryer to the highest heat setting.
- Hold the hair dryer about 2–3 inches away from the patch.
- Apply heat to the patch, moving the hair dryer in a back-and-forth motion for about 30 seconds.
- Once the patch feels warm, try peeling it off gently. If it doesn’t come off easily, continue applying heat for another 10–20 seconds.
- If the patch still doesn’t come off, you can use a flat-edged object, like a credit card or a butter knife, to carefully lift the edges of the patch while applying heat. Be cautious not to damage the fabric.
Remember to be careful when using heat and sharp objects to avoid injury or damage to the fabric.
Method 5: Soak with White Vinegar
![To remove an iron-on patch using White Vinegar](https://b3479809.smushcdn.com/3479809/wp-content/uploads/2023/11/liyuan0719_White_Vinegar._df86b1f2-ff48-47aa-a413-4a5cdc341442-4.jpg?lossy=2&strip=1&webp=1)
The fifth method is to soak your patch with white vinegar. White vinegar is great for not only removing stains but also loosening the glue.
- Prepare a solution with white vinegar and water in a 1:1 ratio.
- Place the garment with the iron-on patch in the solution. Make sure that the patch is fully submerged in the solution. Let it soak overnight to loosen the adhesive.
- After soaking, if the adhesive has loosened, you should be able to peel off the patch easily. Gently lift the edges and peel them away with the tweezers.
- If the patch doesn’t come off easily, you can use a soft-bristled brush or an old toothbrush to gently scrub the area while it is still wet with vinegar.
- Once the patch is removed, rinse the area with water to remove any vinegar residue. You can also wash the garment as per the care instructions to ensure all the vinegar is removed.
Remember, it’s important to be cautious when removing patches, as excessive force or scraping can damage the fabric.
Method 6: Soak in the Warm Water
To remove an iron-on patch with warm water, follow these steps:
- Fill the tub or sink with warm water. Make sure the water is not too hot, as it can damage the fabric.
- Place the garment with the iron-on patch facing down into the warm water. Make sure the patch is completely submerged.
- Place something heavy on top of the patch to keep it under water.
- When the water in the sink cools, empty it and replenish it with warm water.
- Give it another two or three hours of soaking time.
- Take the object out of the water after a few hours. Gently rub the patch with your fingers or use a soft-bristled brush to loosen the edges. Once the patch starts to loosen, pull it off slowly.
This method may not work for all types of iron-on patches, especially those with stronger adhesives.
How to Remove Adhesive Residue from the Garment
Since you have discovered 6 methods on how to remove an iron on patch, there is still an important issue. How can you remove the adhesive residue on the garment?
To remove any residue left behind after removing an iron on patch, I recommend using a residue remover. It is specifically designed for fabrics. These residue removers are formulated to effectively dissolve and remove any leftover adhesive from the fabric without causing damage.
- Simply apply the residue remover to the affected area.
- Let it sit for a few minutes to penetrate the residue.
- Then, gently rub the area with a soft cloth or sponge to lift off the residue.
- Rinse the fabric thoroughly with water to remove any remaining residue, and pat it dry.
This innovative method ensures that your fabric is left clean and residue-free, ready for your next creative endeavor.
Conclusion
How to remove an iron on patch can be a simple process with the right tools and methods. By following the steps outlined in this blog post, you can easily remove iron-on patches from your clothing or accessories.
Remember to be patient and careful during the removal process to avoid damaging the fabric. Once the patch is removed, you can now explore new patches from Accessories-Wholesaler to add a fresh and unique touch to your items!
Ready to Buy New Patches in Accessories-Wholesaler?
![Accessories-Wholesaler logo](https://b3479809.smushcdn.com/3479809/wp-content/uploads/2023/11/Black-White-Simple-Y2k-Streetwear-Logo.png?lossy=2&strip=1&webp=1)
Are you ready to buy new patches from Accessories-Wholesaler? After removing the old iron-on patch, explore new, fresh, and innovative designs to add a unique touch to your clothing and accessories.
Accessories-Wholesalers offer a wide range of patches that cater to every individual’s style and preferences. Every patch showcases creativity, uniqueness, and a sense of innovation. Whether it’s a bold and vibrant design or a subtle and intricate pattern, I’m sure you can find patches that reflect your personality and allow you to express yourself with style!